Resources

Check category

INTRODUCTION TO LIQUID COOLING PLATE

  • Categories:Resources
  • Author:
  • Origin:
  • Time of issue:2019-09-24 10:54
  • Views:

(Summary description)

INTRODUCTION TO LIQUID COOLING PLATE

(Summary description)

  • Categories:Resources
  • Author:
  • Origin:
  • Time of issue:2019-09-24 10:54
  • Views:
Information
Liquid Cold Plates
There are many ways to accomplish liquid cooling, but the most common method is to have a plate with a flow path that moves liquid under the devices. After the heat is absorbed into the liquid, it is taken out of the plate and into the larger system. While water or water/glycol are the most common fluids used in liquid cooling, gasoline, oil, and refrigerant are other fluids that can be utilized.
There are lots of ways to construct a cold plate and the methods can be driven by the level of performance needed, the materials needed or the environmental requirements.
One construction method is to use a series of cross-drilled holes in a plate. The holes intersect in the plate to determine the flow pattern and unneeded patterns are plugged. This construction method can be cost effective, but the pattern is limited to straight lines.
Another method is to embed a tube in a plate by machining a groove in the plate. The tube can either be placed toward the top surface of the plate to provide better cooling to devices mounted on that surface, or it can be embedded further into the plate so that it cools devices mounted on both sides of the plate. This option provides greater flexibility, but the thermal performance is limited because of the surface area of the tube perimeter.
To get more performance, extended surface area in contact with the fluid is required and this leads to machined cold plates. The cold plate is constructed of a plate that has been machined to form some flow passages and then a cover is assembled to capture the flow. The extended surface area can be machined in place or installed by use of a piece of folded fin. The cover can be flat or be another machined plate. The method of assembly of the two parts can be done by gasket/screw, glue/screw, brazing, or welding and is dependent on the required performance and the requirements of the environment.
Features and Benefits
Compact and efficient cooling method
Quiet, reliable and leak-free
Compatible with water, glycol or other cooling fluids
Standard and custom designs available

Scan the QR code to read on your phone

底部

We’re one thermal management technology company based on metal fabrication

language
中国
韩国
韩国
韩国
韩国
韩国

Contact

Office address:

No.12 Mozhou road, Jiangning area, Nanjing city, Jiangsu province, China

Phone: 

025 86136265

WhatsApp/Wechat:

13626107044

Skype:

fly20091116


Copyright © 2019-2022 Nanjing Metalli Industrial CO.,Ltd 300.cn All Rights Reserved  苏ICP备14021006号-1  Powered by www.300.cn